Down Hold Milling Clamp, Down Hold Milling Clamps, Manufacturer

For holding work-piece requiring higher cutting forces.

• Angular sliding jaw provides pull-down and side clamping forces.
• Its typical design and construction is suitable for heavy and rough manufacturing, for example, on planning / Plano-milling machines. Applications: In tool room and machine shop on Planning, Milling, Plano-Milling, Jig Boring, Shaping, Grinding Machines and on VTLs. Also useful as clamping element in the design of fixtures.

Note: T-bolt / Stud shall be supplied with Down hold Milling Clamp only on specific request.

Material:
Body	High-Tensile S.G. Iron
Jaw Seating	High-Tensile S.G. Iron
Jaw	Heat-Treated Steel; Blackened

Type	Size (B X H X L)	Slot	Suitable for Screw	Approx. Clamping Force	Unit Weight
	(mm)			(kg)	(kg)
PDMC-18	58 X 55 X 138	18	Upto M16	1500	1.500
PDMC-24	70 X 80 X 190	26	Upto M24	3000	4.100
PDMC-30	120 X 135 X 250	35	Upto M30	4500	14.150

Get a quote

Down Hold Milling Clamp [Product Type: PDMC]

Links

Useful Links

Location